Smart-casual jacket 'Monte Carlo' grey mottled
The unconstructed finish in double-breasted, three-button style made of silk, linen and cotton in a finely textured fabric makes the smart-casual jacket 'Monte Carlo' by TAGLIATORE a classic companion for any occasion.
- Blend of silk, linen and cotton
- Soft feel
- Fine textured fabric
- Slim fit
- Double-breasted three-button style
- Pointed lapel
- Signature pin on the lapel
- Classic breast pocket
- Patch hip pockets
- Kissing buttons
- Side vents at the back
- Unconstructed design
- Three inside pockets
Information on product safety (GPSR) We do not have any safety instructions.
Via Mottola KM 2 200 Zona Industriale
IT 74015 Martina Franca
Email: info@tagliatore.com
- DHL GoGreen: 0 EUR (from 500 EUR); 5 EUR (under 500 EUR); 1–3 business days
- UPS Standard: 5 EUR; 1–3 business days
- DHL courier: 25 EUR, 1 business day (within Hamburg)
As a consumer you can revoke your order within 14 days after receiving your goods and return the ordered products or exchange them for a different size. Your withdrawal does not have to state a reason.
- Material: 38% Seide, 36% Leinen, 16% Baumwolle, 10% Polyamid
- Model: Monte Carlo
- A = Back Length
- B = Chest Measurement
- C = Sleeve Length
- D = Shoulder Width
- E = Back Width
| Back Length: | Gr. 50: 72,5 cm |
| Back Width: | Gr. 50: 45 cm |
| Shoulder Width: | Gr. 50: 14 cm |
| Sleeve Length: | Gr. 50: 64 cm |
| Chest Measurement: | Gr. 50: 106 cm |
| Int. | XS | S | M | L | XL | XXL | XXXL |
| EU | 46 | 48 | 50 | 52 | 54 | 56 | 58 |
| EU L | 90 | 94 | 98 | 102 | 106 | 110 | 114 |
| EU K | 23 | 24 | 25 | 26 | 27 | 28 | 29 |
| UK/US | 36 | 38 | 40 | 42 | 44 | 46 | 48 |
A = Back Length
Measure the closed garment in the middle of the back from the nape seam, or the lowest seam of the neckband, straight down to the hem.
B = Chest Measurement
Measure from the height of the chest line, slightly below the sleeve seam, straight from the left to the right side and then double the measurement.
C = Sleeve Length
Lay the flat garment on a plane surface. Then measure straightly from the highest point of the sleeve down to the sleeve seam.
D = Shoulder Width
The straightly measured distance from the nape seam to the sleeve seam.
E = Back Width
Measure straight from the left side to the right side in the back, approximately on half of the sleeve height.
